In factories and harsh field environments, communication errors frequently occur due to noise or surges that travel in through communication lines from external sources, and the resulting electrical stress can put expensive equipment and facilities at risk of damage over time. SystemBase's BASSO-1010DC/ISO has built-in protection against noise and surges entering through the RS422/RS485 line, reducing the risk of equipment failure or damage and delivering the high performance and high reliability needed for ongoing facility and equipment maintenance.
CMOS digital isolation is an isolation technique that offers a compact size, high isolation performance, and low power consumption, delivering superior reliability compared with conventional optical isolation methods. This feature electrically isolates the input and output signals, protecting the device from external noise or strong electrical disturbances caused by nearby motors, actuators, or other equipment. When communicating with expensive equipment, isolation provides a cost-effective way to protect that equipment, and BASSO-1010DC/ISO, built with this feature, delivers a longer service life and greater stability than conventional approaches.
BASSO-1010DC/ISO provides an Auto Toggling function for RS422/RS485 communication. This feature helps prevent electrical conflicts between output signals when configuring an RS422 multi-drop network or operating on an RS485 network. Since Auto Toggling is implemented in hardware and automatically adapts to the active interface mode, it offers a convenient, hassle-free way to manage signal direction.
Designed with the unpredictable conditions of industrial environments in mind, BASSO-1010DC/ISO incorporates multiple safeguards against electrical disturbances such as overvoltage entering through the RS422 and RS485 ports, along with high-reliability components, delivering both outstanding reliability and high performance.
| Specifications | Interface: RS422 / RS485 Serial Port: 3.81mm pitch, 5-pole terminal block on both primary and secondary sides Maximum Communication Speed: Max. 921.6kbps Signals: RS422 (TX+, TX−, RX+, RX−), RS485 (TRX+, TRX−) |
| Specifications | Isolation: ±3kV (digital type) ESD: Contact ±8kV to ±15kV, Air ±15kV to ±30kV Peak Pulse Current (8/20μs): Max. 21A Peak Pulse Power (8/20μs): Max. 700W |
| Specifications | LED: PWR (Red), RXD (Red), TXD (Green) Power Input: 9–12V DC, 500mA or higher (0.9W power consumption) Adapter Specification: 9VDC 500mA, Φ3.5mm outer / Φ1.35mm inner Terminal Block: 28–16 AWG, torque 0.2N·m, strip length 7mm Dimensions: 54(W) × 72.0(L) × 28.4(H) mm Weight: 238g total, 102g product weight |
| Specifications | Operating Temperature: -40 to 85℃ Storage Temperature: -40 to 85℃ Humidity: 5–90% non-condensing Certifications: KC |
Click the button below to go to the resource center, where you can download related materials such as manuals, drivers, and utilities.
DownloadIn factories and harsh field environments, communication errors frequently occur due to noise or surges that travel in through communication lines from external sources, and the resulting electrical stress can put expensive equipment and facilities at risk of damage over time. SystemBase's BASSO-1010DC/ISO has built-in protection against noise and surges entering through the RS422/RS485 line, reducing the risk of equipment failure or damage and delivering the high performance and high reliability needed for ongoing facility and equipment maintenance.
CMOS digital isolation is an isolation technique that offers a compact size, high isolation performance, and low power consumption, delivering superior reliability compared with conventional optical isolation methods. This feature electrically isolates the input and output signals, protecting the device from external noise or strong electrical disturbances caused by nearby motors, actuators, or other equipment. When communicating with expensive equipment, isolation provides a cost-effective way to protect that equipment, and BASSO-1010DC/ISO, built with this feature, delivers a longer service life and greater stability than conventional approaches.
BASSO-1010DC/ISO provides an Auto Toggling function for RS422/RS485 communication. This feature helps prevent electrical conflicts between output signals when configuring an RS422 multi-drop network or operating on an RS485 network. Since Auto Toggling is implemented in hardware and automatically adapts to the active interface mode, it offers a convenient, hassle-free way to manage signal direction.
Designed with the unpredictable conditions of industrial environments in mind, BASSO-1010DC/ISO incorporates multiple safeguards against electrical disturbances such as overvoltage entering through the RS422 and RS485 ports, along with high-reliability components, delivering both outstanding reliability and high performance.
| Specifications | Interface: RS422 / RS485 Serial Port: 3.81mm pitch, 5-pole terminal block on both primary and secondary sides Maximum Communication Speed: Max. 921.6kbps Signals: RS422 (TX+, TX−, RX+, RX−), RS485 (TRX+, TRX−) |
| Specifications | Isolation: ±3kV (digital type) ESD: Contact ±8kV to ±15kV, Air ±15kV to ±30kV Peak Pulse Current (8/20μs): Max. 21A Peak Pulse Power (8/20μs): Max. 700W |
| Specifications | LED: PWR (Red), RXD (Red), TXD (Green) Power Input: 9–12V DC, 500mA or higher (0.9W power consumption) Adapter Specification: 9VDC 500mA, Φ3.5mm outer / Φ1.35mm inner Terminal Block: 28–16 AWG, torque 0.2N·m, strip length 7mm Dimensions: 54(W) × 72.0(L) × 28.4(H) mm Weight: 238g total, 102g product weight |
| Specifications | Operating Temperature: -40 to 85℃ Storage Temperature: -40 to 85℃ Humidity: 5–90% non-condensing Certifications: KC |
Click the button below to go to the resource center, where you can download related materials such as manuals, drivers, and utilities.
Download
